Written by No Doubt Marketing

Vinyl siding replacement and repair is something that you can tackle yourself, providing that you have the right tools and materials at your disposal. Here is a step by step guide to what you need to do when it comes to siding replacement. You may need to replace siding if cracks or staining occur, especially when the temperatures become lower. If you want to initiate the repair at the right time, then it would be wise to do so in the spring time.

The materials that you will need for replacing siding include a new vinyl siding section matching the damaged section as exactly as possible, a zipper to separate the panels from one another, a utility knife, polyurethane caulking, a carpenter's square, a pencil, a backsaw or tin snips.

If you initiate the repair during the warmer months, it will be easier for you to manipulate the siding because the pieces will be flexible and much easier to work with. Do not try anything if there is ice on the siding, because it is literally capable of shattering into pieces of you do.

To begin your siding replacement, you should use the zipper so that you can unlock the panel above or next to the damaged one. Lift it up, removing the nails holding the damaged vinyl siding in place. Mark lines for cutting along each of the damaged area's sides using a pencil and a carpenter's square and cut the panel using tin snips or using a back saw so that you can remove the damaged area from the exterior of your home.

Cut a replacement vinyl siding piece that is two inches longer that the removed section, allowing for 1" worth of overlap on each side of the vinyl siding piece. Snap the new piece's top edge in place, nailing it in place using aluminum box nails that are long enough that they can penetrate into the studs by at least 1 inch. Snap the other edge in using the zipper, marking the end of the repair.

If there are holes in your vinyl siding, the repair is a little different. To perform a vinyl siding replacement on a hole, you need to place the punctured siding piece on a flat surface, placing the replacement siding behind and fix them both together using glue and cement. Once you have accomplished this, the repair process will have come to an end, and you will no longer need to worry about hole sin your vinyl siding being seen by any guests that visit your home.

Repairing vinyl siding means replacing the vinyl siding panel, and while this can appear to be a difficult task, it is actually quite easy if you have the right tools. If you are willing to DIY, then replacing your vinyl siding when it becomes damaged is actually extremely easy.

Get great savings on your next siding replacement project. Get free price quotes from multiple siding contractors to make sure you get the best deal and the most reliable provider.