Get FREE Aerial Lifts Price Quotes
from Multiple Suppliers

• Need a minimum of 32' height of platform. Units should be 32-46. Interested in new and used pricing. Also interested in knuckleboom 32'-34', new and used. Indoor used only - electric only.

• I will be using the lift for tree trimming and property maintenance and painting of buildings.

• 19ft, 25ft, and 30 ft scissor lifts.

• 2 man lift low ceiling, plateform.

• 26 high 32 inches wide.

• 26' to 32'.

• 4x4 for outdoor terrain.

• 4x4 scissor lift dual-fuel minimum of 26' platform.

• 4x4, electric if possible.

• 60 foot man basket straight boom.

• Able to fit into elevator cabs, and through doorways.

• About a 15 ton cherry picker.

• Basket must turn, electric outlet at top,have a 60ft to trade in.

• Battery opperated.

• Bumper pull manlift with 60 ft working height.

• Currently have a scissor lift but would like a lift to replace lights, door parts and various other projects.

• GS 1930 needed. Genie with 36 inch extention platform.

• Genie TMZ-34/19 34FT Towable Boom Lift.

• Genie Z30/20N type or JLG preferred.

• Genie, Snorkle, and JLG prices.

• Hanging residential and commercial overhead doors, spring.shaft lines, vertical and horizontal tracks.

• Hope to find one that can go down stairs or be carried down stairs.

• I am a painting contractor I would prefer a lift that is movable from the cage or if that is too expensive I would go one that is a manual crank operated.

• I am looking at the 1930 sissor lift.

• I am looking for cherry picker for aerospace ground support. hight is 27 meters.

• I am looking for a JLG Tow-Pro.

• I am looking for a Simon model SE4124 up & over lift.

• I am looking for a tow able boom lift preferably gas but electric is ok, it needs to be at least 45' to 50'.

• I am looking for a towable lift for tree work.

• I am looking for quotes on two types of Genie Scissor Lifts. GS1930 & GS2646.

• I would like prices on the Genie GS1960 & Skyjack SJ1113219.

• I'm looking for a Z30 20N Genie knuckle boom.

• I'm looking for a freight elevator or scissor lift for a warehouse.

• Just need a scissor lift to remove and add signs. One that can be towed behind a truck.

• Just need something for my painting company 40' to 60'. Looking for a deal.

• Looking for a trailer version of man lift...or an extremely good buy on a Sky Genie or JLG self-propelled lift.

• Looking for driveable boom lift with outriggers. It needs approx. 45 ft platform height. It needs to be lightweight (5000 lbs +/-) so it can be hauled on a 20 ft flatbed trailer.

• Must be able to attach to a truck or cargo van.

• Must be able to be operated by one person.

• Must have platform extension.

• Need to be able to get access to metal roof over carports.

• Need to be able to run around on rough terrain at times.

• Need to go through T Bar ceiling, 24x24.

• Needs to be able to reach 15 feet out and 30 feet up with 400 lbs in bucket and room for two men. Must be electric and able to operate in the rain.

• Needs to fit through standard doorways and work over fixed church pews.

• One or two person manlift to change lights, areial work.

• Prefer Skytrack, then there is JLG & Genie. Whats available used. My customer may go with a new scissor lift also. So quote new and used if you can.

• Primarily needed for changing light bulbs in a multi-purpose church gym / sanctuary. The ceiling is approximately 25 feet above the floor. Needs to fit between standard doorways.

• Pruning company, looking for a track mounted lift to get into narrow spaces.

• Self propelled.

• The lift needs to be towable or trailer mounted.

• The lift will be used for painting, light bulb replacements, wall repairs.

• This piece of equipment would be for changing lights in doors and out doors.

• To be towable with tractor rather than self driven.

• Towable, either gas or electric.

• Trailer mounted articulated boom.

• Uneven, unpaved ground. Hitch pulled preference.

• WE are a commercial lighting service company looking for 3 to 5 scissor lifts of a narrow width.

• We are hanging drywall and I am looking for Ideas. I saw a backer scaffolding like deal on TV previews of DIY, but it was just a glimpse and I cannot find anything like it, But light is what I would like or easy to get up and down stairs.

• We are looking for a cherry picker that we can use when we are cutting down and pruning trees.

• We do all mechanical trades HVACR, plubming and electrical. We have 2 trailers with ramps and are currently renting a 1930 scissor lift.

• We just need some type of lift to get a pallet from ground level to our docks. Pallets are 48x48 and weight maximum would be 3000 lbs.

• Trailer mounted arieal platform lift.

• We are looking to purchase a used scissor lift for less than $5,000.00.

• We need a lift that can be controlled in the platform.

• All wheel drive; enclosed cab with heat & air. multi use capable. (materials & people);forks or personnel work-platform; with operator controls for a separate work-platform.

• Cage needs to fit through a 22" x 22" opening of a T-Bar Ceiling.

• Flashing lights.

• Genie s-65 diesel power.

• Grove manufactured if possible.