Compare Free Price Quotes From Multiple Dealers
For CNC Routers with Vacuums
Describe your vacuum-equipped CNC router needs below:
LinkError
|
|
About BuyerZone
BuyerZone is the leading online marketplace for business purchasing.
- Founded in 1992
- 1,000,000+ users
- 50,000+ monthly requests
- 8,500+ active suppliers
Buyer's Guide
Find CNC Routers
CNC Router Types
Supplier Program
|
• 48x96 table size, vacuum table, software.
• 5 hp spindle 1-phase 4'x8' vacuum table cnc router all in 1-phase.
• 5 x 10 table, vacuum table required. Budget: 20-30k.
• Axyz 3 axis router - vacuum table - 8 tool changer.
• Carving memorial headstones with diamond tooling need: vacuum system 60" x 90" table 3 axis 3D capability.
• Desire to trim vacuum formed parts off of rigid foam blanks. Custom shapes-each toolpath will be different, 5' X 5' bed with approx. 2' Z axis.
• Do you have a vacuum hold down system for your CNC routers.
• Flat vacuum bed type to work with flat sheets. 6 station tool changer.
• I am looking for a high speed xy table that is capable of cutting woven fabric with an adhesive and a paper backing. A vacuum table would be optimal.
• I need 4'x8' table with tool changer and vacuum table.
• I need to cut 4x8 sheets of plastic. I want a tool changer. I need a vacuum table.
• It needs a Vacuum table.
• Looking for a cutting table around 4ft x 20ft. Vacuum Table as well.
• Machine is required to route out half inch plank wood. Wood is 14 feet long and 12 inches wide. Table should be able to cut a minimum of 4ftx4ft Vacuum assist preferred. Multi-head design preferred. We will use 6 different router bits.
• Milling multiple parts our of a single sheet of honeycomby sandwich material. Need vacuum bed.
• Multi-tool head at least 4' x 8'cutting surface. Vacuum table.
• Need 4 ft X 8 ft capacity with vacuum hold down.
• Need a minimum spindle length of 12 inches, 18 to 20 inches ideal. Also require vacuum take away for cuttings.
• Need vacuum table and micro mister.
• Preferable Table size 72" x 150". Routing parameters of 64"across 146"length. Primary purpose to route aluminum composite material (i.e. Alucobond, Reynobond, Alpolic ACM). Vacuum hold-down.
• Spindle max 24000 rpm inverter ball screw driver microstepper or servo motor driver system vacuum table.
• This equipment will be used to trim the perimeter of 1/8" (approx) thick ABS plastic vacuum formed parts. We would also use this to macine any holes or slots required in the formed parts.
• Tool changer, 4 x 10 bed, vacuum bed, dust collection, min 10 hp motor, Software - nesting program.
• Trimming vacuum formed parts, machining foam.
• Vacuum table, chip collection, high speed spindle, approx 60" x 120" cutting area.
• Vacuum table, possible tool changer, table size roughly 96" x 96" or 48" x 48"
• Want a machine with dual 7-8 Hp spindles, minimum 60"x 120" vacuum table,'98-'02 with 10,000 to 30,000 hrs. Must be running.
• Want to cut acrylic and polycarbonate sheeting 1/8 to 1/2 thick need vacuum hold down spindle, bits, any thing that is need to meet manufacturing safety concerns, dust collection.
• We are interested in a 4 x 8' or 5 x 12' table w/ vacuum pump, software etc... Have no experience w/ cnc but know CAD and manufacture custom furniture. Want to start manufacturing limited production lines of furniture from plyboo and appleply etc.
• We do not need vacuum or tool changer.
• We will also be looking to purchase many of the accessories IE: Vacuum system, drill, vacuum table, computer hardware and software. We anticipate moving quickly with this new, unique business venture so we are also interested in turnaround, installation and training timeframes.
• Workspace 1500mm x3000mm x1000mm, vacuum table,nedd info of what is your offer.
• Would also be good to know the cost of a tool changer and vacuum table if available Machine will be used for small production guitarmaking Need .004" or better accuracy.