• Able to fit semi truck rigs and part for odd products.
• Booth needs to be large enough to fit a large truck with doors open ex: H2, HUMMER.
• Booth will be use for prep and painting of our trucks, foklifts, and scaffolding.
• Don,t no i paint alot of 1 ton trucks.
• For boat, truck or car.
• I am looking for a 20 X 20 inch powder coating booth and gun ( used if possible ). This will need to go into a on-site truck.
• I am looking for a booth to paint our boom trucks. I need installation support including fire supression, venting and air and electrical drops.
• I am painting cars, trucks, and semi trucks and need a large enough opening to get the vehicles into the booth. The booth will be outdoors and needs to be heated.
• I believe the assembly of any paint booth in my shop will require additional modification to the unit. I need assistence in choosing the best low cost unit and a accurate quote for a booth that can handle up to duel tired pickup trucks.The dimensions above are not accurate.
• I just need lights and vents and a baker if in my price range i need one that can fit a truck in.
• I know that we need it to be 40 feet long and we will be using it to paint big rig trucks. I am not sure the highth or the width.
• I need the most inexpensive paint booth for cars and trucks asap.
• I spray wood cabinets but I need the booth to fit a full size truck inside when it is not in use.
• I want gas heat / semi downdraft will be painting cars & suvs , light trucks.
• I want to paint an old mail delivery truck.
• I would like a booth that fits long bed crew cab trucks, air intakes on the sides of the roof not center and exhaust in the floor.
• I would like a booth that is easy to maintain, gives out a LOT of light, I would like a mixing booth attasched to the spray booth, I would need to be able to put large trucks in the booth.
• Intending to start small powder coating shop mostly on off road parts for motorcycles and quads, also will be doing bumpers and racks for jeeps and trucks.
• Looking at eagle spray booth prices. Need car booth and semi truck booth. Have an eagle sre.# 1816 down draft car. Need to change to cross flow.
• Looking for powder coating system for fairly large parts that we mfg for trucks.
• Looking to create a complete powder coating operation for parts up to truck bed size but mostley specialty parts smaller.
• Low cost oven for that reaches 500 Degrees for powder coating entire chevy truck piece by piece.
• Medium Sized trucks- ambulances and fire pumpers-downflo-standard or drive through.
• My paint booth has to be long enough to fit an extended cab long box truck if applicable,wide enough to comfortably walk around and spray. Also needs several filters and a high output crossflow exterior exhaust fan.
• This is for a custom truck building shop - off road trucks and show trucks.
• We apply industrial coatings that don't require a lot of detail, just a good corrosion resistant coat. We're painting oilfield service bodies, haul trucks and chemical trucks.
• We are a company that maufactures tow trucks.We are shopping for a finish sprsy booth.
• We are a restoration shop and will be painting 1-2 cars per month. We are looking for a down draft or semi down draft booth to paint classic cars and nothing biggerv than a pick up truck.
• We are in process of opening a custom paint shop for automobiles and trucks and will be setting up shop in a 30' by 40' 2 bay shop.
• We are looking to expand and will need an additional car spray booth. This must be able to accomodate 1 ton or dually pickup trucks. Looking for crossdraft to keep cost down.
• We are quoting on replacing a truck paint booth destroyed in a fire. The underfloor vent system already exists. The booth will be installed in a 60' wide pre-engineered building.
• We have a truck fab shop. We install componets on our fleet we use for highway maintenance.
• We need a booth to paint cars & minivans trucks.
• We would be painting trailers and truck boxes simular to dump doxes. We would either like a stand alone both or a booth that we can put inside a shop.
• Able to fit semi truck rigs and part for odd products.
• Booth needs to be large enough to fit a large truck with doors open ex: H2, HUMMER.
• Booth will be use for prep and painting of our trucks, foklifts, and scaffolding.
• Don,t no i paint alot of 1 ton trucks.
• For boat, truck or car.
• I am looking for a 20 X 20 inch powder coating booth and gun ( used if possible ). This will need to go into a on-site truck.
• I am looking for a booth to paint our boom trucks. I need installation support including fire supression, venting and air and electrical drops.
• I am painting cars, trucks, and semi trucks and need a large enough opening to get the vehicles into the booth. The booth will be outdoors and needs to be heated.
• I believe the assembly of any paint booth in my shop will require additional modification to the unit. I need assistence in choosing the best low cost unit and a accurate quote for a booth that can handle up to duel tired pickup trucks.The dimensions above are not accurate.
• I just need lights and vents and a baker if in my price range i need one that can fit a truck in.
• I know that we need it to be 40 feet long and we will be using it to paint big rig trucks. I am not sure the highth or the width.
• I need the most inexpensive paint booth for cars and trucks asap.
• I spray wood cabinets but I need the booth to fit a full size truck inside when it is not in use.
• I want gas heat / semi downdraft will be painting cars & suvs , light trucks.
• I want to paint an old mail delivery truck.
• I would like a booth that fits long bed crew cab trucks, air intakes on the sides of the roof not center and exhaust in the floor.
• I would like a booth that is easy to maintain, gives out a LOT of light, I would like a mixing booth attasched to the spray booth, I would need to be able to put large trucks in the booth.
• Intending to start small powder coating shop mostly on off road parts for motorcycles and quads, also will be doing bumpers and racks for jeeps and trucks.
• Looking at eagle spray booth prices. Need car booth and semi truck booth. Have an eagle sre.# 1816 down draft car. Need to change to cross flow.
• Looking for powder coating system for fairly large parts that we mfg for trucks.
• Looking to create a complete powder coating operation for parts up to truck bed size but mostley specialty parts smaller.
• Low cost oven for that reaches 500 Degrees for powder coating entire chevy truck piece by piece.
• Mainly automotive motorcycles & p/u trucks prefer down draft booth.
• Medium Sized trucks- ambulances and fire pumpers-downflo-standard or drive through.
• My paint booth has to be long enough to fit an extended cab long box truck if applicable,wide enough to comfortably walk around and spray. Also needs several filters and a high output crossflow exterior exhaust fan.
• This is for a custom truck building shop - off road trucks and show trucks.
• We apply industrial coatings that don't require a lot of detail, just a good corrosion resistant coat. We're painting oilfield service bodies, haul trucks and chemical trucks.
• We are a company that maufactures tow trucks.We are shopping for a finish sprsy booth.
• We are a restoration shop and will be painting 1-2 cars per month. We are looking for a down draft or semi down draft booth to paint classic cars and nothing biggerv than a pick up truck.
• We are in process of opening a custom paint shop for automobiles and trucks and will be setting up shop in a 30' by 40' 2 bay shop.
• We are looking to expand and will need an additional car spray booth. This must be able to accomodate 1 ton or dually pickup trucks. Looking for crossdraft to keep cost down.
• We are quoting on replacing a truck paint booth destroyed in a fire. The underfloor vent system already exists. The booth will be installed in a 60' wide pre-engineered building.
• We have a truck fab shop. We install componets on our fleet we use for highway maintenance.
• We need a booth to paint cars & minivans trucks.
• We would be painting trailers and truck boxes simular to dump doxes. We would either like a stand alone both or a booth that we can put inside a shop.