• Dry-chem fire supression roof ventilation must be able to pass through trusses with a 22" space or vent out wall.
• Fully enclosed with cross ventilation, temperture control.
• I am interested in both booths need and don't need ventilation to the outside.
• I need a booth and ventilation system that will allow me to spray with airless spray, water base and solvent base finishes.
• Indoor - against one wall - with outside ventilation/exhaust.
• Needs lighting and exhaust ventilation.
• Only concearn is addiquite ventilation.
• Proper ventilation and filters where necessary.
• Small wood working shop needs ventilation spray booth system that will pass UBC and IFC requirements.
• Some of the materials that would be sprayed if we make this purchase require ventilation equipment that is explosion proof. Please take this into consideration when responding to my query.
• The booth would be used to cure resins and would be required to reach 250 °F. Ventilation is not necessary due to the method of material processing. Dimensions given are approximate, other dimensions may also be considered.
• This is for export and we will need 3 booths this is for a large sign producing company usung acrylic paints.we do not need lamps or oven must have ventilation system and capture facility. Ventillaters a must.
• Ventilation fire protection explosion/fire proof electrical connnedtions.
• Ventilation for spray painting steel components.
• We are looking for spraying equipment and ventilation/filter equipment to be installed into existing vault 15X20X8(high).
• We need an open booth with a work bench so are techs can pull a chair up to. They are using a silicone based paint and airbrushes to paint prostetics we need good ventilation and inexspensive filters wich are easy to clean.
• We will utilize the two booths for finishing work on guitars. Each booth will need to be OSHA approved with a ventilation and fire suppression system. We use water based and nitrocellulose lacquer, paints and stains.
• A lot of light and good ventilation.
• Baking / paint curing. Local code adherance assistance. Mixing room. Ventilation (temp controlled).
• Dry-chem fire supression roof ventilation must be able to pass through trusses with a 22" space or vent out wall.
• Fully enclosed with cross ventilation, temperture control.
• I am interested in both booths need and don't need ventilation to the outside.
• I need a booth and ventilation system that will allow me to spray with airless spray, water base and solvent base finishes.
• Indoor - against one wall - with outside ventilation/exhaust.
• Needs lighting and exhaust ventilation.
• Only concearn is addiquite ventilation.
• Proper ventilation and filters where necessary.
• Small wood working shop needs ventilation spray booth system that will pass UBC and IFC requirements.
• Some of the materials that would be sprayed if we make this purchase require ventilation equipment that is explosion proof. Please take this into consideration when responding to my query.
• The booth would be used to cure resins and would be required to reach 250 °F. Ventilation is not necessary due to the method of material processing. Dimensions given are approximate, other dimensions may also be considered.
• This is for export and we will need 3 booths this is for a large sign producing company usung acrylic paints.we do not need lamps or oven must have ventilation system and capture facility. Ventillaters a must.
• Ventilation fire protection explosion/fire proof electrical connnedtions.
• Ventilation for spray painting steel components.
• We are looking for spraying equipment and ventilation/filter equipment to be installed into existing vault 15X20X8(high).
• We need an open booth with a work bench so are techs can pull a chair up to. They are using a silicone based paint and airbrushes to paint prostetics we need good ventilation and inexspensive filters wich are easy to clean.
• We will utilize the two booths for finishing work on guitars. Each booth will need to be OSHA approved with a ventilation and fire suppression system. We use water based and nitrocellulose lacquer, paints and stains.