• 1 Outside Door 5 Inside Doors Want to use same Proximity keyfob we are using for our time clock system. They are 26-bit HID.
• 2 door system each with card reader on one side of door. Other side of door can be push button exit and/or proximity sensor. Access logging not necessary, but ok. Data entry from PC would be preferred. System expandability beyond two doors not required.
• 4 entry points (doors) Entry audit systems Less than 100 users Program lock times Prefer simple installation Proximity with PIN is preferred (or swipe with PIN).
• 4 telephone entry systems with 7 proximity readers. 6 electric door locks (price also 6 magnetic door holders). Technical assistance.
• Ability to auto unlock / lock by day of week & time of day - proximity card to be used after hrs & weekends.
• Access control auto lock and unlock based on schedule, tracking of who came it at what time/pc based with battery back up, already have the magnet wiring is done with motion egress just need the system to control it also have the proximity card readers as well thanks.
• Electric latch panic bar, proximity card reader, ADA actuator, Pneumatic door opener, electric power transfer, remote push button desk control,cyclinder lock, continuous hinge.
• Exterior entry point coverage and possibly 1 interior door covered. We prefer proximity cards or the keychain tokens.
• Facility consists of access points in 6 buildings. Entry to be monitored by who, when and what entrance. Can be Proximity or mag strip low-profile readers. Data should be retrievable and able to archive.
• Government CAC card reader for access into the builing. This should also incorperate proximity readers with the CAC cards. We would like to be able to only use CAC cards to access the builing.
• I am securing a private Airport, Sliding gates operated, Swing Gates mag-locks, using proximity readers and key pads. PC controled with CCTV monitoring.I will supply PC to software spec, you provide software controlers and readers.
• I have two tandem full height turnstiles and one single full height turnstile. The turnstiles are outside. The mill site has 639 employees. I am looking for a complete (everything except installation) proximity card sytstem to install.
• I need key card or proximity card access for a un-manned 24 hour facility with the ability to restrict access for certain cards and also monitor and log activity via computer access.
• I two external entry point thati need both proximity reader and a push button controller with talk back mic/speakers and built-in camera. I have two internal access points that I need Proximity on entry and exit only.
• I want the system to have 4 doors on proximity and the rest biometric.
• Looking for a basic proximity card reader system. Majority of the doors are interior, possibly one exterior door. Not a big budget company. No current system in place.
• Looking for a proximity card access system for approx 70 employees with a main entrance and server room door to be controlled. Possibility of two employee entrances also to be controlled.
• Looking for something to use as an I.D. card with picture, proximity card, biometric entry.
• Need 6 doors now, expandable to an additional 6 doors with a proximity reader system.
• Picture ids on the proximity badges would be nice, but are not a requirement.
• Please email only. We have a security system. We want to add a proximity card access system for the main entrances.
• Proximity card system on existing building.
• Proximity detector Software program user freindly hardwire and wirless callout.
• System must record access information and check real-time with database to authenticate. Proximity cards (no mag stripes) with picture id. Looking for software to support issuing/printing of cards also.
• This is a community pool. Pool code locking system is too easy to give codes away. Proximity card would eliminate that issue.
• This is for a newly constructed high-rise condominium. We want to replace all the entry doors to the common areas with proximity card access. We need rough estimates to take forward to the board and to budget for installation as soon as possible.
• This is our ideal system. We want proximity card access to roughly 6 doors and have the ability to assign different access levels in house, as well as monitor all card activity. We also wish do all card deactivation and activation in house.
• This will be a secured envirioment. Different employees having unique access to certain rooms. We would like the ability to incorporate video surveillance and Proximity security with the access control system. If all 3 cannot not work together please inform me of your best sollution.
• Two access points to the project that will need to include proximity readers w/ gates for vehicle traffic and possibly multiple turnstyles for employee access.
• WE are needing the equipment that will prevent nonstudents from entering the school. Preferably RFID proximity cards that we could print student ID cards on.
• Want to have access control at front sliding gate. Want a proximity card reader for employee's to use to gain access. This reader will be outdoors and a minimum of 1500ft from controller. Also, want a central station to monitor and control the gate for deliveries after hours.
• We already have 2 doors set up, but we want to upgrade our system to add a 3rd door. On this door we're requesting a quote to install a maglock, emergency button, exit motion, power supply, proximity card reader.
• We are a gates community of 18 homes. We are looking to replace our current remote control gate with proximity access. We also require guest access in the form of a call box or something similar.
• We are actually looking for a system on 4 iron fence gates and 5 facility doors. Our El Paso facility has a maglock system using a key fob rather than a card at the proximity reader, do you have that available?.
• We are currently in the process of a new business plan. We are looking for a security system for 100 -150 unique users, with multi-level security for different areas within our facility. Either proximity or card scan would be acceptable.
• We are looking for 2 proximity readers to control 2 outdoor gate openers. The system must interface with our wireless network for authorization control and turning users on and off remotely.
• We are looking for proximity access card system for our neighborhood pool. Does this sytem include the locking mechanism for the gate.
• We are looking to install proximity type entry in each building on all three campuses while monitoring the maintaining non-swipe doors. For estimate purposes it can be given that the average doors per building would be one proximity swipe and three doors merely monitored (looking to verify open/close).
• We currently use WIN-PAK 2.0 with two Northern Computer N-1000-IV-X panels controlling about 8 doors with barcode readers. Looking for an economical solution to replace/expand the system to control about 22 doors and utilize proximity readers. Proximity stickers would most likley work best to attach to existing employee badges.
• We have a Kawneer External door with a push bar release that must maintain use of the push bar and key locks as part of the electronic entry system and one standard office door lock. Would like to use proximity cards (non-magnetic) for entry-separate entry readers on both doors.
• We have a maglock keypad entrance system. We want to change to a proximity reader with printable ID card and keep the maglock equipment.
• We have a single office in a commercial building. We are primarily interested in having a proximity access system installed for the main office door and possibly additional offices later on.
• We need an access control system,using proximity cards that can accomodate the photo of the card user.
• We need service and maintenance on an existing security system which includes sielox terminal controllers, electronic lock power supplies, von duprin electric door strikes, electronic mortise locks, HID proximity card readers.
• We need to expand the secure access to the 1st and 2nd floor. The 3rd floor has the secure access setup. We are using Indala Cards for Proximity access. And windsx s/w application.
• We would like a system that will automatically lock our doors after hours requiring a proximity card to access the building.
• We would like this proximity card access system to be able to track time and attendance as well.
• We would like to issue cards that use proximity for building access, but that also have a magnetic strip to use for other purposes.
• We'd use a mixture of proximity cards and key fobs.
• Will possibly want to utilize existing proximity readers from existing system in place. Will need to be able to badge employees, contractors and visitors for two separate sites. Approx. 200 employees at one site and approx. 20 at second site.
• 1 Outside Door 5 Inside Doors Want to use same Proximity keyfob we are using for our time clock system. They are 26-bit HID.
• 2 door system each with card reader on one side of door. Other side of door can be push button exit and/or proximity sensor. Access logging not necessary, but ok. Data entry from PC would be preferred. System expandability beyond two doors not required.
• 4 entry points (doors) Entry audit systems Less than 100 users Program lock times Prefer simple installation Proximity with PIN is preferred (or swipe with PIN).
• 4 telephone entry systems with 7 proximity readers. 6 electric door locks (price also 6 magnetic door holders). Technical assistance.
• Ability to auto unlock / lock by day of week & time of day - proximity card to be used after hrs & weekends.
• Access control auto lock and unlock based on schedule, tracking of who came it at what time/pc based with battery back up, already have the magnet wiring is done with motion egress just need the system to control it also have the proximity card readers as well thanks.
• Electric latch panic bar, proximity card reader, ADA actuator, Pneumatic door opener, electric power transfer, remote push button desk control,cyclinder lock, continuous hinge.
• Exterior entry point coverage and possibly 1 interior door covered. We prefer proximity cards or the keychain tokens.
• Facility consists of access points in 6 buildings. Entry to be monitored by who, when and what entrance. Can be Proximity or mag strip low-profile readers. Data should be retrievable and able to archive.
• Government CAC card reader for access into the builing. This should also incorperate proximity readers with the CAC cards. We would like to be able to only use CAC cards to access the builing.
• I am securing a private Airport, Sliding gates operated, Swing Gates mag-locks, using proximity readers and key pads. PC controled with CCTV monitoring.I will supply PC to software spec, you provide software controlers and readers.
• I have two tandem full height turnstiles and one single full height turnstile. The turnstiles are outside. The mill site has 639 employees. I am looking for a complete (everything except installation) proximity card sytstem to install.
• I need key card or proximity card access for a un-manned 24 hour facility with the ability to restrict access for certain cards and also monitor and log activity via computer access.
• I two external entry point thati need both proximity reader and a push button controller with talk back mic/speakers and built-in camera. I have two internal access points that I need Proximity on entry and exit only.
• I want the system to have 4 doors on proximity and the rest biometric.
• Looking for a basic proximity card reader system. Majority of the doors are interior, possibly one exterior door. Not a big budget company. No current system in place.
• Looking for a proximity card access system for approx 70 employees with a main entrance and server room door to be controlled. Possibility of two employee entrances also to be controlled.
• Looking for something to use as an I.D. card with picture, proximity card, biometric entry.
• Need 6 doors now, expandable to an additional 6 doors with a proximity reader system.
• Picture ids on the proximity badges would be nice, but are not a requirement.
• Please email only. We have a security system. We want to add a proximity card access system for the main entrances.
• Proximity card system on existing building.
• Proximity detector Software program user freindly hardwire and wirless callout.
• System must record access information and check real-time with database to authenticate. Proximity cards (no mag stripes) with picture id. Looking for software to support issuing/printing of cards also.
• This is a community pool. Pool code locking system is too easy to give codes away. Proximity card would eliminate that issue.
• This is for a newly constructed high-rise condominium. We want to replace all the entry doors to the common areas with proximity card access. We need rough estimates to take forward to the board and to budget for installation as soon as possible.
• This is our ideal system. We want proximity card access to roughly 6 doors and have the ability to assign different access levels in house, as well as monitor all card activity. We also wish do all card deactivation and activation in house.
• This will be a secured envirioment. Different employees having unique access to certain rooms. We would like the ability to incorporate video surveillance and Proximity security with the access control system. If all 3 cannot not work together please inform me of your best sollution.
• Two access points to the project that will need to include proximity readers w/ gates for vehicle traffic and possibly multiple turnstyles for employee access.
• WE are needing the equipment that will prevent nonstudents from entering the school. Preferably RFID proximity cards that we could print student ID cards on.
• Want to have access control at front sliding gate. Want a proximity card reader for employee's to use to gain access. This reader will be outdoors and a minimum of 1500ft from controller. Also, want a central station to monitor and control the gate for deliveries after hours.
• We already have 2 doors set up, but we want to upgrade our system to add a 3rd door. On this door we're requesting a quote to install a maglock, emergency button, exit motion, power supply, proximity card reader.
• We are a gates community of 18 homes. We are looking to replace our current remote control gate with proximity access. We also require guest access in the form of a call box or something similar.
• We are actually looking for a system on 4 iron fence gates and 5 facility doors. Our El Paso facility has a maglock system using a key fob rather than a card at the proximity reader, do you have that available?.
• We are currently in the process of a new business plan. We are looking for a security system for 100 -150 unique users, with multi-level security for different areas within our facility. Either proximity or card scan would be acceptable.
• We are looking for 2 proximity readers to control 2 outdoor gate openers. The system must interface with our wireless network for authorization control and turning users on and off remotely.
• We are looking for proximity access card system for our neighborhood pool. Does this sytem include the locking mechanism for the gate.
• We are looking to install proximity type entry in each building on all three campuses while monitoring the maintaining non-swipe doors. For estimate purposes it can be given that the average doors per building would be one proximity swipe and three doors merely monitored (looking to verify open/close).
• We currently use WIN-PAK 2.0 with two Northern Computer N-1000-IV-X panels controlling about 8 doors with barcode readers. Looking for an economical solution to replace/expand the system to control about 22 doors and utilize proximity readers. Proximity stickers would most likley work best to attach to existing employee badges.
• We have a Kawneer External door with a push bar release that must maintain use of the push bar and key locks as part of the electronic entry system and one standard office door lock. Would like to use proximity cards (non-magnetic) for entry-separate entry readers on both doors.
• We have a maglock keypad entrance system. We want to change to a proximity reader with printable ID card and keep the maglock equipment.
• We have a single office in a commercial building. We are primarily interested in having a proximity access system installed for the main office door and possibly additional offices later on.
• We need an access control system,using proximity cards that can accomodate the photo of the card user.
• We need service and maintenance on an existing security system which includes sielox terminal controllers, electronic lock power supplies, von duprin electric door strikes, electronic mortise locks, HID proximity card readers.
• We need to expand the secure access to the 1st and 2nd floor. The 3rd floor has the secure access setup. We are using Indala Cards for Proximity access. And windsx s/w application.
• We would like a system that will automatically lock our doors after hours requiring a proximity card to access the building.
• We would like this proximity card access system to be able to track time and attendance as well.
• We would like to issue cards that use proximity for building access, but that also have a magnetic strip to use for other purposes.
• We'd use a mixture of proximity cards and key fobs.
• Will possibly want to utilize existing proximity readers from existing system in place. Will need to be able to badge employees, contractors and visitors for two separate sites. Approx. 200 employees at one site and approx. 20 at second site.