• 1. Notifier 10-Zone Conventional Fire Alarm Control Panel 2. Notifier Transmitter Module 3. System Sensor Smoke Detector 4. Labor to replace, test and final checkout.
• 6 manual pull station 1 fire alarm control panel 14 smoke detector 2 wire photoelectric with bas 8 wall combination horn/lamp alarm signal 12/24 8 wall strobe light 12/24 8 heat detector 5 weatherproof horn alarm signal.
• Central monitoring only for fire alarm control panel.
• Currently have a Fire-Lite Alarms System. Need an evaluation of the Fire Alarm Control Panel MP-12/24 and overall system.
• Existing conditions Pyrotronics Fire alarm control panel. The system is failing.
• Existing fci control panel. Need to add initiating devices. Can't find fci on the web.
• I need a conventional fire alarm control panel with 4 smoke detectors, 2 smoke carbon monoxide detectors, 4 pullbox stations, 2 heat detectors, 1 annunciator, 4 horn-strobes, 1 horn-strobe for outside, 2 strobes for bathroom in the first floor.
• I need the following items: (1)fire alarm control panel (1)remote annunicator (2)booster power suppliers (horn/strobe) (9)photoelectric smoke detectors (2)rate of rise heat detectors (8)manual pull stations (1)waterflow/tamper module(sprinkle monitoring) (18)ceiling horn/strobes (2)Ceiling strobes.
• I need to have a small control panel and 2 pull stations with strobe and audio alarms and a ansel system tied in.
• Looking 4 a non addressable control panel, 15 smoker dectors, exterior horn strobe, ac transient suppressor, telephone line suppressor, interior speaker, touch pad LCD control unit. Have no city or county codes.....looking to install it and have a company monitor.
• Minimum requirement to comply with RI law for residential apartment/condo building with four units. This building is 100 plus years old and will need a fire alarm monitoring system with a control panel. Appointments to inspect the property for quote of the system will have to be made.
• Need a multi zonefire alarm control panel, a Kingfisher fire alarm radio transmitter. Design compliant with NFPA72 Kingfisher rep to test out system. System needs to be complete with strobes pull stations for 10 exits, horns, duct smoke detector, for a 58,000 sq ft modular building.
• Need control panel - 6/pull stations - 12 fire/smoke detectors and 5 to 6 horn strobes.
• Need fire control panel, annunciator, back up battery supply, 8 auditovisual devices, 4 alert visual devices, 13 system sensor 2w smoke detectors, signal line wiring, notification circuit wiring and submittal to local fire marshall.
• Need fire pull station / horn strobe and the fire control panel the pull station and horn strobe connect too I'm not sure a power supply station is need to connect the pull station and horn strobe. If so let me know and price of everything.
• Replacement of existing fire alarm control panel. One-silent knight IFP-50 Addressable control panel, Five-Silent Knight SD500-MIM addressable input modules, one-accessories package (transformer, backup battery, phone jack and cored)and labor.
• System must be 24V D/C with a central control panel, supplied with 120V A/C power.
• The fire marshall says I need three pull alarms, three strobe lights, a horn and a control panel.
• We are looking for a price quote for the installation of a Notifier NFS-320 Control Panel.
• We need a system with one control panel that will serve two buildings. We are a day care center. The center is located south of Albuquerque (175 miles) in Truth or Consequences, New Mexico.
• We need to replace the control panel for a system with two zones.
• Horns ,Strobes ,Heat Detector ,Smoke Detector,and control panels.
• Nf pa 72 complete fire alarm system. Which includes annunciator, pull station, control panels,smoke detector, central station monitoring, emergency lights, please include price with permits from building department.
• 1. Notifier 10-Zone Conventional Fire Alarm Control Panel 2. Notifier Transmitter Module 3. System Sensor Smoke Detector 4. Labor to replace, test and final checkout.
• 6 manual pull station 1 fire alarm control panel 14 smoke detector 2 wire photoelectric with bas 8 wall combination horn/lamp alarm signal 12/24 8 wall strobe light 12/24 8 heat detector 5 weatherproof horn alarm signal.
• Central monitoring only for fire alarm control panel.
• Control panel, manual pulls, strobe, horn, Ionization Smoke Detectors, heat detectors.
• Currently have a Fire-Lite Alarms System. Need an evaluation of the Fire Alarm Control Panel MP-12/24 and overall system.
• Existing conditions Pyrotronics Fire alarm control panel. The system is failing.
• Existing fci control panel. Need to add initiating devices. Can't find fci on the web.
• I need a conventional fire alarm control panel with 4 smoke detectors, 2 smoke carbon monoxide detectors, 4 pullbox stations, 2 heat detectors, 1 annunciator, 4 horn-strobes, 1 horn-strobe for outside, 2 strobes for bathroom in the first floor.
• I need the following items: (1)fire alarm control panel (1)remote annunicator (2)booster power suppliers (horn/strobe) (9)photoelectric smoke detectors (2)rate of rise heat detectors (8)manual pull stations (1)waterflow/tamper module(sprinkle monitoring) (18)ceiling horn/strobes (2)Ceiling strobes.
• I need to have a small control panel and 2 pull stations with strobe and audio alarms and a ansel system tied in.
• Looking 4 a non addressable control panel, 15 smoker dectors, exterior horn strobe, ac transient suppressor, telephone line suppressor, interior speaker, touch pad LCD control unit. Have no city or county codes.....looking to install it and have a company monitor.
• Minimum requirement to comply with RI law for residential apartment/condo building with four units. This building is 100 plus years old and will need a fire alarm monitoring system with a control panel. Appointments to inspect the property for quote of the system will have to be made.
• Need a multi zonefire alarm control panel, a Kingfisher fire alarm radio transmitter. Design compliant with NFPA72 Kingfisher rep to test out system. System needs to be complete with strobes pull stations for 10 exits, horns, duct smoke detector, for a 58,000 sq ft modular building.
• Need control panel - 6/pull stations - 12 fire/smoke detectors and 5 to 6 horn strobes.
• Need fire control panel, annunciator, back up battery supply, 8 auditovisual devices, 4 alert visual devices, 13 system sensor 2w smoke detectors, signal line wiring, notification circuit wiring and submittal to local fire marshall.
• Need fire pull station / horn strobe and the fire control panel the pull station and horn strobe connect too I'm not sure a power supply station is need to connect the pull station and horn strobe. If so let me know and price of everything.
• Replacement of existing fire alarm control panel. One-silent knight IFP-50 Addressable control panel, Five-Silent Knight SD500-MIM addressable input modules, one-accessories package (transformer, backup battery, phone jack and cored)and labor.
• System must be 24V D/C with a central control panel, supplied with 120V A/C power.
• The fire marshall says I need three pull alarms, three strobe lights, a horn and a control panel.
• We are looking for a price quote for the installation of a Notifier NFS-320 Control Panel.
• We need a system with one control panel that will serve two buildings. We are a day care center. The center is located south of Albuquerque (175 miles) in Truth or Consequences, New Mexico.
• We need to replace the control panel for a system with two zones.
• Horns ,Strobes ,Heat Detector ,Smoke Detector,and control panels.
• Nf pa 72 complete fire alarm system. Which includes annunciator, pull station, control panels,smoke detector, central station monitoring, emergency lights, please include price with permits from building department.